Contact Us

TEL :+86-579-86185277
Address: No.109, Wangjiang North Road, Dongyang City, Zhejiang Province

Home > News > Content
How To Choose The Wall Thickness Of PU Steel Hose
Jul 28, 2017

PU steel hose, steel pipe reinforced PU hose, copper wire hose It is a steel coated with copper wire covered PU transparent material of a PU wire telescopic tube. Mainly used in wear-resistant solids such as dust, powder, fiber, chips and particles, gas and liquid environment for dust and suction plants, industrial vacuum cleaners, paper and textile fibers.

Steel reinforced PU hose with polyether polyurethane hose with copper coated steel wire screw reinforced. Smooth wall to ensure smooth flow of material in the tube. Resistant to mold, hydrolysis resistance. Has excellent resistance to ozone and weather resistance. Comply with RoHS environmental directive requirements. Spiral wire grounding can be static, in line with TRB S 2153 requirements. No plasticizer Hose Flammability to UL 94 HB.

Temperature range: about -40 ° C to + 125 ° C, short time about + 150 ° C.

Wall thickness: 0.4MM, 0.6MM, 0.9MM, 1.0MM, 1.2MM, 1.5MM, 2.0MM (the thinnest place, without wire). According to the different needs of the corresponding wall thickness PU steel pipe.

How do I choose the wall thickness of the PU wire hose from the demand?

1, some of the requirements of large expansion and contraction, frequent swing position commonly used 0.4mm this, this can be compressed, the conventional length of 10 meters, about 2.5 meters after compression.

2, like woodworking machinery, grinding machines, etc. usually choose pipe wall 0.6mm vacuum tube.

3, printing machinery, PCB drilling machine, such as the use of 0.9 or 1.5mm thickness of the two tubes.

4, some special import machinery will use 2.0mm, there is no domestic manufacturers to produce this thickness, because the market demand is small, occasionally with the use of imported PU steel hose.